aboutsummaryrefslogtreecommitdiffstats
path: root/board/freescale/imx8mq_evk/imx8m_evk.c
blob: 4d7d4d32ac9413324270818958bc60cdca016af2 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
/*
 * Copyright 2016 Freescale Semiconductor, Inc.
 * Copyright 2017-2018 NXP
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <malloc.h>
#include <errno.h>
#include <asm/io.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/imx-common/iomux-v3.h>
#include <asm-generic/gpio.h>
#include <fsl_esdhc.h>
#include <mmc.h>
#include <asm/arch/imx8mq_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/imx-common/gpio.h>
#include <asm/imx-common/mxc_i2c.h>
#include <asm/arch/clock.h>
#include <asm/imx-common/video.h>
#include <asm/arch/video_common.h>
#include <spl.h>
#include <power/pmic.h>
#include <power/pfuze100_pmic.h>
#include <dm.h>
#include "../common/tcpc.h"
#include "../common/pfuze.h"
#include <usb.h>
#include <dwc3-uboot.h>

DECLARE_GLOBAL_DATA_PTR;

#define QSPI_PAD_CTRL	(PAD_CTL_DSE2 | PAD_CTL_HYS)

#define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)

#define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_HYS | PAD_CTL_PUE)

static iomux_v3_cfg_t const wdog_pads[] = {
	IMX8MQ_PAD_GPIO1_IO02__WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL),
};

#ifdef CONFIG_FSL_QSPI
static iomux_v3_cfg_t const qspi_pads[] = {
	IMX8MQ_PAD_NAND_ALE__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL),
	IMX8MQ_PAD_NAND_CE0_B__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL),

	IMX8MQ_PAD_NAND_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
	IMX8MQ_PAD_NAND_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
	IMX8MQ_PAD_NAND_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
	IMX8MQ_PAD_NAND_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL),
};

int board_qspi_init(void)
{
	imx_iomux_v3_setup_multiple_pads(qspi_pads, ARRAY_SIZE(qspi_pads));

	set_clk_qspi();

	return 0;
}
#endif

static iomux_v3_cfg_t const uart_pads[] = {
	IMX8MQ_PAD_UART1_RXD__UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
	IMX8MQ_PAD_UART1_TXD__UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
};

int board_early_init_f(void)
{
	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;

	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));

	set_wdog_reset(wdog);

	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));

	return 0;
}

#ifdef CONFIG_BOARD_POSTCLK_INIT
int board_postclk_init(void)
{
	/* TODO */
	return 0;
}
#endif

int dram_init(void)
{
	/* rom_pointer[1] contains the size of TEE occupies */
	if (rom_pointer[1])
		gd->ram_size = PHYS_SDRAM_SIZE - rom_pointer[1];
	else
		gd->ram_size = PHYS_SDRAM_SIZE;

	return 0;
}

#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, bd_t *bd)
{
	return 0;
}
#endif

#ifdef CONFIG_FEC_MXC
#define FEC_RST_PAD IMX_GPIO_NR(1, 9)
static iomux_v3_cfg_t const fec1_rst_pads[] = {
	IMX8MQ_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL),
};

static void setup_iomux_fec(void)
{
	imx_iomux_v3_setup_multiple_pads(fec1_rst_pads,
					 ARRAY_SIZE(fec1_rst_pads));

	gpio_request(IMX_GPIO_NR(1, 9), "fec1_rst");
	gpio_direction_output(IMX_GPIO_NR(1, 9), 0);
	udelay(500);
	gpio_direction_output(IMX_GPIO_NR(1, 9), 1);
}

static int setup_fec(void)
{
	setup_iomux_fec();

	/* Use 125M anatop REF_CLK1 for ENET1, not from external */
	clrsetbits_le32(IOMUXC_GPR1,
			BIT(13) | BIT(17), 0);
	return set_clk_enet(ENET_125MHz);
}


int board_phy_config(struct phy_device *phydev)
{
	/* enable rgmii rxc skew and phy mode select to RGMII copper */
	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x1f);
	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x8);

	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x100);

	if (phydev->drv->config)
		phydev->drv->config(phydev);
	return 0;
}
#endif

#ifdef CONFIG_USB_DWC3

#define USB_PHY_CTRL0			0xF0040
#define USB_PHY_CTRL0_REF_SSP_EN	BIT(2)

#define USB_PHY_CTRL1			0xF0044
#define USB_PHY_CTRL1_RESET		BIT(0)
#define USB_PHY_CTRL1_COMMONONN		BIT(1)
#define USB_PHY_CTRL1_ATERESET		BIT(3)
#define USB_PHY_CTRL1_VDATSRCENB0	BIT(19)
#define USB_PHY_CTRL1_VDATDETENB0	BIT(20)

#define USB_PHY_CTRL2			0xF0048
#define USB_PHY_CTRL2_TXENABLEN0	BIT(8)

static struct dwc3_device dwc3_device_data = {
	.maximum_speed = USB_SPEED_SUPER,
	.base = USB1_BASE_ADDR,
	.dr_mode = USB_DR_MODE_PERIPHERAL,
	.index = 0,
	.power_down_scale = 2,
};

int usb_gadget_handle_interrupts(void)
{
	dwc3_uboot_handle_interrupt(0);
	return 0;
}

static void dwc3_nxp_usb_phy_init(struct dwc3_device *dwc3)
{
	u32 RegData;

	RegData = readl(dwc3->base + USB_PHY_CTRL1);
	RegData &= ~(USB_PHY_CTRL1_VDATSRCENB0 | USB_PHY_CTRL1_VDATDETENB0 |
			USB_PHY_CTRL1_COMMONONN);
	RegData |= USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET;
	writel(RegData, dwc3->base + USB_PHY_CTRL1);

	RegData = readl(dwc3->base + USB_PHY_CTRL0);
	RegData |= USB_PHY_CTRL0_REF_SSP_EN;
	writel(RegData, dwc3->base + USB_PHY_CTRL0);

	RegData = readl(dwc3->base + USB_PHY_CTRL2);
	RegData |= USB_PHY_CTRL2_TXENABLEN0;
	writel(RegData, dwc3->base + USB_PHY_CTRL2);

	RegData = readl(dwc3->base + USB_PHY_CTRL1);
	RegData &= ~(USB_PHY_CTRL1_RESET | USB_PHY_CTRL1_ATERESET);
	writel(RegData, dwc3->base + USB_PHY_CTRL1);
}
#endif

#ifdef CONFIG_USB_TCPC
struct tcpc_port port;
struct tcpc_port_config port_config = {
	.i2c_bus = 0,
	.addr = 0x50,
	.port_type = TYPEC_PORT_UFP,
	.max_snk_mv = 20000,
	.max_snk_ma = 3000,
	.max_snk_mw = 15000,
	.op_snk_mv = 9000,
};

#define USB_TYPEC_SEL IMX_GPIO_NR(3, 15)

static iomux_v3_cfg_t ss_mux_gpio[] = {
	IMX8MQ_PAD_NAND_RE_B__GPIO3_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
};

void ss_mux_select(enum typec_cc_polarity pol)
{
	if (pol == TYPEC_POLARITY_CC1)
		gpio_direction_output(USB_TYPEC_SEL, 1);
	else
		gpio_direction_output(USB_TYPEC_SEL, 0);
}

static int setup_typec(void)
{
	int ret;

	imx_iomux_v3_setup_multiple_pads(ss_mux_gpio, ARRAY_SIZE(ss_mux_gpio));
	gpio_request(USB_TYPEC_SEL, "typec_sel");

	ret = tcpc_init(&port, port_config, &ss_mux_select);
	if (ret) {
		printf("%s: tcpc init failed, err=%d\n",
		       __func__, ret);
	}

	return ret;
}
#endif

#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_IMX8M)
int board_usb_init(int index, enum usb_init_type init)
{
	int ret = 0;
	imx8m_usb_power(index, true);

	if (index == 0 && init == USB_INIT_DEVICE) {
#ifdef CONFIG_USB_TCPC
		ret = tcpc_setup_ufp_mode(&port);
#endif
		dwc3_nxp_usb_phy_init(&dwc3_device_data);
		return dwc3_uboot_init(&dwc3_device_data);
	} else if (index == 0 && init == USB_INIT_HOST) {
#ifdef CONFIG_USB_TCPC
		ret = tcpc_setup_dfp_mode(&port);
#endif
		return ret;
	}

	return 0;
}

int board_usb_cleanup(int index, enum usb_init_type init)
{
	int ret = 0;
	if (index == 0 && init == USB_INIT_DEVICE) {
		dwc3_uboot_exit(index);
	} else if (index == 0 && init == USB_INIT_HOST) {
#ifdef CONFIG_USB_TCPC
		ret = tcpc_disable_src_vbus(&port);
#endif
	}

	imx8m_usb_power(index, false);

	return ret;
}
#endif


int board_init(void)
{
	board_qspi_init();

#ifdef CONFIG_FEC_MXC
	setup_fec();
#endif

#ifdef CONFIG_USB_TCPC
	setup_typec();
#endif
	return 0;
}

int board_mmc_get_env_dev(int devno)
{
	return devno;
}

int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	setenv("board_name", "EVK");
	setenv("board_rev", "iMX8MQ");
#endif

#ifdef CONFIG_ENV_IS_IN_MMC
	board_late_mmc_env_init();
#endif

	return 0;
}

#ifdef CONFIG_FSL_FASTBOOT
#ifdef CONFIG_ANDROID_RECOVERY
int is_recovery_key_pressing(void)
{
	return 0; /*TODO*/
}
#endif /*CONFIG_ANDROID_RECOVERY*/
#endif /*CONFIG_FSL_FASTBOOT*/

#if defined(CONFIG_VIDEO_IMXDCSS)

struct display_info_t const displays[] = {{
	.bus	= 0, /* Unused */
	.addr	= 0, /* Unused */
	.pixfmt	= GDF_32BIT_X888RGB,
	.detect	= NULL,
	.enable	= NULL,
#ifndef CONFIG_VIDEO_IMXDCSS_1080P
	.mode	= {
		.name           = "HDMI", /* 720P60 */
		.refresh        = 60,
		.xres           = 1280,
		.yres           = 720,
		.pixclock       = 13468, /* 74250  kHz */
		.left_margin    = 110,
		.right_margin   = 220,
		.upper_margin   = 5,
		.lower_margin   = 20,
		.hsync_len      = 40,
		.vsync_len      = 5,
		.sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode          = FB_VMODE_NONINTERLACED
	}
#else
	.mode	= {
		.name           = "HDMI", /* 1080P60 */
		.refresh        = 60,
		.xres           = 1920,
		.yres           = 1080,
		.pixclock       = 6734, /* 148500 kHz */
		.left_margin    = 148,
		.right_margin   = 88,
		.upper_margin   = 36,
		.lower_margin   = 4,
		.hsync_len      = 44,
		.vsync_len      = 5,
		.sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
		.vmode          = FB_VMODE_NONINTERLACED
	}
#endif
} };
size_t display_count = ARRAY_SIZE(displays);

#endif /* CONFIG_VIDEO_IMXDCSS */